What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
15.06.2025 23:59

This is 'the assistant's answer'
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
The other is “what does a “fuse” do?”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It seems Mohan does not understand the difference between a comment and an Answer.
Boston Red Sox rookie ‘revelation’ made ‘huge’ throw before walkoff - MassLive
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–10[John johnson John Johnson ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Thousands of galaxies revealed in a single Webb image - Earth.com
The bolt then partially travels down the line to your home.
There are three different concepts here that are getting confused.
He then describes Rainy Season and Lightning.
Ossett prostate cancer patient urges men to have checks - BBC
These are simplified answers to the original question, and does not change anything I wrote above.
In schematic diagrams this is the symbol for a fuse:
so, what happens?
Are there any examples of outdated values in the Bible?
This is where this question deviates from being a 'generic' question, and becomes more specific.
One
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What was the worst spanking you got growing up?
So, the voltage could go up to 500 volts, and the fuse will not open up.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Because the load is inductive, the current lags the voltage.(by a bit).
Should Pete Rose's record as the all-time hits leader be recognized and celebrated?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
The MOV will conduct when the voltage exceeds 50% of line voltage.
but I think this circuit , shows a few more pieces.
Is there anything wrong with me because I'm still single?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is lightning?
How do military families balance personal political views with respect for civilian leadership?
It also is a device that limits the change in current flow.
a photo is worth a thousand words.
At one ohm, the resistor has a maximum of 1 watt power.
A circuit breaker is similar, but is resettable.
the problem then depends on "how fast does the fuse operate?".
I post the exact comment here.
What is one thing nice you did for someone today or something they did for you?
These devices are installed between the “hot” and “neutral” and protective ground.
This is where the MOV conducts again, and dissipated the energy.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
[image of Common-mode choke]
Now when you have a certain ac resistance, then a current flows in a loop.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
eight
what exactly is a ‘surge’ protector?
This device then solves the entire problem.
For this case there are devices called Metal oxide varistors (MOV).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
An AC voltage/ current source, and an ac inductive load.
Barnstars:
There are two important concepts here.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–14 [Omar Gharbi Omar Gharbi ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
[old diagram got deleted by accident]
Edit 2024–10.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
(Dc diagram shown, AC is similar).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
He then asserts :
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Upvotes:
But… the neutral is now “floating” because of the 1 ohm resistance.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
One is “what exactly is in a ‘surge protector’ ? ”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But it can get overloaded, and no longer works.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
nine
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At least they know the answer if they wanted it.
The third is lightning and “how it gets conducted into a home.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
A fuse is a non-resetable over current circuit protector.
2024–10–16 [ OO OLAOYE OYEBODE ]
Here is a simplified AC power diagram.
He then describes the function of a fuse.
This one hit behind the barn.
First Sentence: